|
|
Specifications for Monster® Home Theatre POWERBAR™ 1100 with Clean Power Stage 2, 8 outlets, 3 pr. coax and 1 pr. Phone
Part Number MPB-1100
To add this item to your cart, simply type a quantity into the quantity field and click "Add Item."
To remove or change the quantity on an item, click "Display Cart".
To view items from a different product line, select the product from the list on the left, or try our search.
Home Theatre POWERBAR™ 1100 with Clean Power Stage 2 v2.0

Height: 3 Inches
Width: 19 Inches
Depth: 4 Inches
Weight: 6 lbs.
You Need to Protect Your Components from Unstable AC Power
The power condition in the U.S. is unstable. The AC power that runs your
home theater is constantly in a state of flux. Sometimes there's too much
voltage, sometimes not enough. Power can become so unstable that you can
actually see it happening, like when the lights in your house suddenly
begin flickering. during the worst case scenario, when your equipment
turns back on, a power spike can be 200-300 volts.
Your expensive electronic home theater components are extremely sensitive
to ANY increase in voltage, and can be severely damaged or destroyed by
these unseen fluctuations in power. And, when it comes to surge protection,
remember, IT'S ALL OR NOTHING... every possible pathway for surges (including
coax and phone lines) must be protected.
Monster POWERBARS™ Provide Maximum Protection
The Monster Power Home Theatre POWERBAR™ 1100 is equipped with fast-acting,
high capacity Multiple SurgeGuard™ Circuitry which instantly detects
any voltage surge or spike and immediately suppresses it BEFORE it can
even reach your components. Plus, we've designed the POWERBAR 1100 with
3 sets of coaxial connections and 1 pair of phone jacks, so you can hook
up your satellite receiver, cable box or HDTV antenna for total home theater
system protection. BEST of all, unlike other surge protectors, Monster's
ultra low loss RF circuitry provides maximum protection with virtually
NO SIGNAL LOSS.
|